CIM_StorageCapabilities

Class reference

Subclass of CIM_Capabilities

A subclass of Capabilities that defines the Capabilities of a StorageService or StoragePool. For example, an instance of StorageCapabilities could be associated with either a StorageConfigurationService or StoragePool by using ElementCapabilities.

Key properties

Local properties

uint16[] SupportedDataOrganizations

Types of volume data organizations supported.

ValueMap Values
0 Other
1 Unknown
2 Fixed Block
3 Variable Block
4 Count Key Data

uint32[] AvailableRPM

The rotational speed of disk media which are be available. Values are in revolutions per minute. SSD devices shall report 0.

uint16 PackageRedundancyMax

PackageRedundancyMax describes the maximum number of redundant packages that can be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The default redundancy is specified using PackageRedundancyDefault, while the maximum is defined by PackageRedundancyMax.

uint16 DataRedundancyMin

DataRedundancyMin describes the minimum number of complete copies of data that can be maintained. Examples would be RAID 5 where 1 copy is maintained and RAID 1 where 2 or more copies are maintained). Possible values are 1 to n. The default redundancy is specified using DataRedundancyDefault, while the maximum is defined by DataRedundancyMax.

uint16 Encryption

This property reflects support of the encryption feature implemented by some disk drives.

ValueMap Values
0 Unknown
1 Not Supported
2 Supported

boolean NoSinglePointOfFailure

Indicates whether or not the associated element supports no single point of failure. Values are: FALSE = does not support no single point of failure, and TRUE = supports no single point of failure.

uint16 PackageRedundancyDefault

PackageRedundancyDefault describes the default number of redundant packages that will be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The bounds for redundancy are specified using the properties, PackageRedundancyMax and PackageRedundancyMin.

uint16 ElementType

Enumeration indicating the type of element to which this StorageCapabilities applies.

ValueMap Values
0 Unknown
1 Reserved
2 Any Type
3 StorageVolume
4 StorageExtent
5 StoragePool
6 StorageConfigurationService
7 LogicalDisk
8 StorageTier

uint16[] AvailableDiskType

Enumeration indicating the type of DiskDrives which may be available.

ValueMap Values
0 Unknown
1 Other
2 Hard Disk Drive
3 Solid State Drive
4 Hybrid

uint16 DataRedundancyDefault

DataRedundancyDefault describes the default number of complete copies of data that can be maintained. Examples would be RAID 5 where 1 copy is maintained and RAID 1 where 2 or more copies are maintained. Possible values are 1 to n. The bounds for the redundancy (max and min) are defined by DataRedundancyMax and DataRedundancyMin.

uint64[] AvailableInterconnectSpeed

The speed of disk interfaces which are be available. Values are in bits/second.

boolean NoSinglePointOfFailureDefault

Indicates the default value for the NoSinglePointOfFailure property.

uint16[] SupportedCompressionRates

The SupportedCompressionRates identifies the compression rates that are supported by the implementation, including “None”. If “None” is specified, then no other rate may be identified.

ValueMap Values
1 None
2 High
3 Medium
4 Low
5 DMTF Reserved
Implementation Decides
32768..65535 Vendor Specific

uint16 ParityLayoutDefault

ParityLayout specifies whether a parity-based storage organization is using rotated or non-rotated parity. If this capabilities instance is associated with a pool that was created with a range of QOS then ParityLayoutDefault represents the default value. Other available values can be determined by using the ‘GetSupportedParityLayouts’ method. If the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and ParityLayout is not supported in subsequent creation of elements from this pool. Consequently, the ‘GetSupportedParityLayouts’ method cannot be used, and the ParityLayoutGoal property in StorageSetting instances used in child element operations on this pool MUST be set to NULL. A NULL value for ParityLayoutDefault indicates that the system does not support configuration of storage by specifying ParityLayout.

ValueMap Values
2 Non-Rotated Parity
3 Rotated Parity

uint16 DeltaReservationMin

DeltaReservationMin is a number between 1 (1%) and a 100 (100%) that specifies the minimum amount of space that should be reserved in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the lower limit, while DeltaReservationMax sets the upper limit.

uint16 DeltaReservationDefault

Delta reservation is a number between 1 (1%) and a 100 (100%) that specifies how much space should be reserved by default in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the default value, while DeletaReservationMax and DeltReservationMin set the upper and lower bounds.

uint16 DeltaReservationMax

DeltaReservatioMax is a number between 1 (1%) and a 100 (100%) that specifies the maximum amount of space reserved in a replica for caching changes. For a complete copy this would be 100%, but it can be lower in some implementations. This parameter sets the upper limit, while DeltaReservationMin sets the lower limit.

uint16[] AvailableInterconnectType

Enumeration indicating the type of disk interfaces which may be available.

ValueMap Values
0 Unknown
1 other
2 SAS
3 SATA
4 SAS/SATA
5 FC
6 SOP

uint16 ExtentStripeLengthDefault

Extent Stripe Length describes the number of underlying StorageExtents across which data is striped in the common striping-based storage organizations. This is also known as the number of ‘members’ or ‘columns’.

A NULL value for ExtentStripeLengthDefault indicates that the system does not support configuration of storage by specifying Stripe Length.

If Extent Stripe Length is supported, and this Capabilities instance is associated with a pool that was created with a range of QOS then ExtentStripeLengthDefault represents the default value. Other available values(such as min, max, and discrete values) can be determined by using the ‘GetSupportedStripeLengths’ and ‘GetSupportedStripeLengthRange’ methods.

If Extent Stripe Length is supported and the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and Extent Stripe Length is not supported in subsequent creation of elements from this pool. Consequently, the ‘GetSupportedStripeLength’ methods cannot be used, and in a StorageSetting instance used as a goal when creating or modifying a child element of the pool, ExtentStripeLengthGoal, ExtentStripeLengthMin, and ExtentStripeLengthMax MUST be set to NULL.

uint16[] AvailableFormFactorType

Enumeration indicating the types of disk form factors which may be available.

ValueMap Values
0 Unknown
1 Other
2 Not Reported
3 5.25 inch
4 3.5 inch
5 2.5 inch
6 1.8 inch

uint16 DataRedundancyMax

DataRedundancyMax describes the maximum number of complete copies of data that can be maintained. Examples would be RAID 5 (where 1 copy is maintained) and RAID 1 (where 2 or more copies are maintained). Possible values are 1 to n. The default redundancy is specified using DataRedundancyDefault, while the minimum is defined by DataRedundancyMin.

uint16 PackageRedundancyMin

PackageRedundancyMin describes the minimum number of redundant packages that can be used. For example, in the storage domain, package redundancy describes how many disk spindles can fail without data loss including, at most, one spare. An example would be RAID5 with a spare disk which would have a PackageRedundancy of 2. Possible values are 0 to n. The default redundancy is specified using PackageRedundancyDefault, while the minimum is defined by PackageRedundancyMin.

uint64 UserDataStripeDepthDefault

User Data Stripe Depth describes the number of bytes forming a strip in common striping-based storage organizations. The strip is defined as the size of the portion of a stripe that lies on one extent. Thus, ExtentStripeLength * UserDataStripeDepth will yield the size of one stripe of user data. A NULL value for UserDataStripeDepthDefault indicates that the system does not support configuration of storage by specifying Stripe Depth.

If User Data Stripe Depth is supported, and this Capabilities instance is associated with a pool that was created with a range of QOS then UserDataStripeDepthDefault represents the default value. Other available values(such as min, max, and discrete values) can be determined by using the ‘GetSupportedStripeDepths’ and ‘GetSupportedStripeDepthRange’ methods.

If User Data Stripe Depth is supported and the pool was created with a single specific QOS, representing a Raid group, set, or rank, then this property represents the current/fixed value for the pool, and User Data Stripe Depth is not supported in subsequent creation of elements from this pool. Consequently, the ‘GetSupportedStripeDepth’ methods cannot be used, and in a StorageSetting instance used as a goal when creating or modifying a child element of the pool, UserDataStripeDepthGoal, UserDataStripeDepthMin, and UserDataStripeDepthMax MUST be set to NULL.

Local methods

uint32 GetSupportedStripeLengths (uint16[] StripeLengths)

For systems that support discrete ExtentStripeLengths for volume or pool creation, this method can be used to retrieve a list of supported values. Note that different implementations may support either the GetSupportedStripeLengths or the GetSupportedStripeLengthRange method. Also note that the advertised sizes may change after the call due to requests from other clients. If the system only supports a range of sizes, then the return value will be set to 3.

ValueMap Values
0 Method completed OK
1 Method not supported
2 Choices not available for this Capability
3 Use GetSupportedStripeLengthRange instead

Parameters

OUT uint16[] StripeLengths
List of supported ExtentStripeLengths for a Volume/Pool creation or modification.

uint32 GetSupportedParityLayouts (uint16[] ParityLayout)

For systems that support Parity-based storage organizations for volume or pool creation, this method can be used to the supported parity layouts.

ValueMap Values
0 Method completed OK
1 Method not supported
2 Choice not aavailable for this capability

Parameters

OUT uint16[] ParityLayout

List of supported Parity for a Volume/Pool creation or modification.

ValueMap Values
2 Non-Rotated Parity
3 Rotated Parity

uint32 GetSupportedStripeDepthRange (uint64 MinimumStripeDepth, uint64 MaximumStripeDepth, uint64 StripeDepthDivisor)

For systems that support a range of UserDataStripeDepths for volume or pool creation, this method can be used to retrieve the supported range. Note that different implementations may support either the GetSupportedStripeDepths or the GetSupportedStripeDepthRange method. If the system only supports discrete values, then the return value will be set to 2.

ValueMap Values
0 Method completed OK
1 Method not supported
2 Use GetSupportedStripeDepths instead

Parameters

OUT uint64 MinimumStripeDepth
The minimum UserDataStripeDepth for a volume/pool in bytes.
OUT uint64 MaximumStripeDepth
The maximum UserDataStripeDepth for a volume/pool in bytes.
OUT uint64 StripeDepthDivisor
A volume/pool UserDataStripeDepth must be a multiple of this value which is specified in bytes.

uint32 GetSupportedStripeLengthRange (uint16 MinimumStripeLength, uint16 MaximumStripeLength, uint32 StripeLengthDivisor)

For systems that support a range of ExtentStripeLengths for volume or pool creation, this method can be used to retrieve the supported range. Note that different implementations may support either the GetSupportedExtentLengths or the GetSupportedExtentLengthRange method. Also note that the advertised sizes may change after the call due to requests from other clients. If the system only supports discrete values, then the return value will be set to 3.

ValueMap Values
0 Method completed OK
1 Method not supported
2 Choices not available for this Capability
3 Use GetSupportedStripeLengths instead

Parameters

OUT uint16 MinimumStripeLength
The minimum ExtentStripeDepth for a volume/pool in bytes.
OUT uint16 MaximumStripeLength
The maximum ExtentStripeLength for a volume/pool in bytes.
OUT uint32 StripeLengthDivisor
A volume/pool ExtentStripeLength must be a multiple of this value which is specified in bytes.

uint32 GetSupportedStripeDepths (uint64[] StripeDepths)

For systems that support discrete UserDataStripeDepths for volume or pool creation, this method can be used to retrieve a list of supported values. Note that different implementations may support either the GetSupportedStripeDepths or the GetSupportedStripeDepthRange method. If the system only supports a range of sizes, then the return value will be set to 2.

ValueMap Values
0 Method completed OK
1 Method not supported
2 Use GetSupportedStripeDepthRange instead

Parameters

OUT uint64[] StripeDepths
List of supported UserDataStripeDepths for a Volume/Pool creation or modification.

uint32 CreateSetting (uint16 SettingType, CIM_StorageSetting NewSetting)

Method to create and populate a StorageSetting instance from a StorageCapability instance. This removes the need to populate default settings and other settings in the context of each StorageCapabilities (which could be numerous). If the underlying instrumentation supports the StorageSettingWithHints subclass, then an instance of that class will be created instead.

ValueMap Values
0 Success
1 Not Supported
2 Unspecified Error
3 Timeout
4 Failed
5 Invalid Parameter
DMTF Reserved
32768..65535 Vendor Specific

Parameters

IN uint16 SettingType

If ‘Default’ is passed for the CreateDefault parameter, the Max, Goal, and Min setting attributes are set to the Default values of the parent StorageCapabilities when the instance is created.

If set to ‘Goal’ the new StorageSetting attributes are set to the related attributes of the parent StorageCapabilities, e.g. Min to Min, Goal to Default, and Max to Max.

This method maybe deprecated in lieu of intrinsics once limitations in the CIM Operations are addressed.

ValueMap Values
2 Default
3 Goal
OUT CIM_StorageSetting NewSetting
Reference to the created StorageSetting instance.

Inherited properties

string InstanceID
uint64 Generation
string Caption

Inherited methods

Table Of Contents

Previous topic

CIM_StatisticsService

Next topic

CIM_StorageConfigurationService

This Page